Description
Χρώματα Σπρέι Εφέ Κιμωλίας Spray COSMOS LAC CHALK EFFECT PURE WHITE ΣΠΡΕΙ ΕΦΕ ΚΙΜΩΛΙΑΣ N02 400ml με ματ φινίρισμα για έπιπλα και διακοσμητικά αντικείμενα. Αναζωογονήστε τα έπιπλα και τη διακόσµηση του σπιτιού σας µε απαράµιλλη κοµψότητα. Αποκαταστήστε τα παλιά σας έπιπλα και διακοσμητικά αντικείμενα δίνοντας τους ένα εντυπωσιακό ματ φινίρισμα με τον πιο εύκολο και δημιουργικό τρόπο. ΙDanish for DIY and professional use on most surfaces: wood, metal, stainless steel, glass, ceramics, stone, fabric, paper and more. It does not drip, does not need a primer, covers up to 4m², while the special spray of Cosmos Chalk Effect minimizes the painting time. Give new life to your old furniture, in 15 minutes.
- Acrylic paste 100%
- Extremely matte colors that cover even difficult surfaces
- New generation propellant gas with minimal smell
- Dries quickly
- It doesn't drip
- Includes two (2) spray nozzles for small and large surfaces
- Rubs easily
- It creates a uniform surface of high resistance
- Excellent Adhesion
- High resistance to weather stress and time.
- Protects against rust
- Excellent application on almost all surfaces
- Easy to use
- It does not contain lead
- 24 shades & 1 matte varnish
- 400 ml
Shake the container for at least 3 minutes after you hear the ball. Before first use, spray into the air for 3-4 seconds, with the black valve, to remove any concentrated paint from the inner tube. Test the spray first on a test surface. Spray the object you want to paint from a relatively close distance, 8-10 cm with the black valve or 4-5 cm with the white valve. If you press the nozzle while holding your hand steady, there is a chance that the paint will run and create "tears". We recommend that you apply a second coat, with an interval of 5-10 minutes and then apply varnish. If the nozzle is blocked, replace it with a new one. For best results apply at temperatures between 10-25°C and when humidity is below 65% to ensure proper application. After use, turn the container upside down and spray for 3 seconds. Storage 05-35°C.
- Choose a well-ventilated area and place the surface to be painted over protective nylon
- Always use personal protective equipment gloves/mask
- Make sure the surface you want to paint is clean, dry, even and smooth
- Old wooden furniture may have been waxed, on these use a wire with a little white spirit to clean them before painting. Stained wood ideally sanded with P180 sandpaper before painting
- Cover the areas you don't want to paint with masking tape. Place protective nylon under and behind the surface you wish to spray to prevent accidents
- Apply two coats of the Chalk Effect series in relatively quick strokes
- Spray first vertically and then horizontally. Wait 5-10 minutes before applying the next coat
- For small objects or areas that need special attention to detail use the white spray nozzle from a distance of 4-5 cm. For larger surfaces and speed use the black spray nozzle from a distance of 8-10 cm
- If you want to achieve the effect of natural wear, one day (24 hours) after painting, use a fine sandpaper P180-220 and gently sand the parts of the surface that you want to remove the color, revealing the bare wood. This technique works best if you choose to sand the corners and edges of your surface
- You can also combine two (2) different colors, a light base color like Chalk Effect Pure White with a second color on top. When you sand off the exterior paint instead of the wood it will reveal the paint color
Reviews
There are no reviews yet.